O Ring Kit for 1 Inch Filter Housing

Name: O Ring Kit for 1 Inch Filter Housing
SKU: 24990164
Price: 3.09 USD
Availability: InStock

SKU:

24990164

$3.09

In Stock

Vendor Part#:

43-OR10K

$3.09

Vendor Part#:

43-OR10K

DETAILS

Designed for installation on suction or discharge side of pump on systems with flow rates of 25 gpm (1 in filter housings), 10 to 50 gpm (1-1/2 in filter housings) and 18 to 100 gpm systems (2 in filter housing) these spin down water filters provide an effective means for removing large volumes of sediment.

Spin down water filters are ideal for whole house filtration, agricultural and commercial/industrial applications.

Overall filtration costs are greatly reduced when used as a pre-filter in duplex filtration systems by preventing post-filtration cartridges from plugging prematurely before their absorption ability is exhausted, maximizing the capacity/utilization of the carbon.

This dramatically increases the life span of taste and odor, granular carbon and other fine micron cartridges.

Spin out action creates centrifugal force which ensures that particulate is forced downward to the spin down water filter bowl protecting the filter element from abrasion
For this reason, it is important that the proper size filter housing is used: up to 1 to 25 gpm use 1 in housing, 10 to 50 gpm use 1-1/2 in housing, 18 to 100 gpm use 2 in housing
Oversizing the spin down water filter can lead to excessive wear or premature clogging of the filter element due to the lack of spin out action
Molded heavy duty PVC filter body
Clear polycarbonate filter bowl allows for visual inspection of flow and filter performance
Each spin down water filter is shipped complete with a purge valve for the 1/2 in MPT drain clean out port providing an easy means to flush (clean) filtrates which are deposited on the outside of the filters screen without having to shut off the water supply
All materials are non-corrosive and are ultraviolet stabilized/weather-resistant
Element can be cleaned with soft brush after the element has been soaked in 50/50 bleach and water solution to remove stains caused by iron, etc, rinse the element thoroughly