info@farmerboyag.com
1-800-845-3374
$223.33
Write a Review
STENNER PUMP® Fixed Pump 110 Volt
$336.93
In Stock
$336.93
DETAILS
This single head Stenner® Pump injects solutions at a fixed 0.13 gph flow rate and can be activated by a water meter for proportional feed for drinking water disinfection for animal health or homeowners. It can also be installed with a controller for sanitizing a swimming pool.
Great news for installers in the commercial pool industry, the Classic series single head fixed pump has been tested by ETL to conform to the ANSI/NSF standard 50 when used with ANSI/NSF 50 listed controllers. Additional applications include pH control, oxidation, corrosion and scale control and more. The pump is also a component of Stenner’s pre-assembled panel system known as the proportional injection system.
The proportional injection system doses solution that is proportional to a water system’s flow rate based on the water volume. A water meter sends a signal to Stenner’s PCM (pump control module) which actuates the fixed output pump. The system is suited for constant pressure (variable speed) well pumps, poultry and livestock houses, irrigation and systems with demand based backup wells and any application with varying flow rates.
If a pre-assembled system isn’t your preference, the pump, PCM and water meter are also available separately. Refer to the chemical resistance guide to determine the compatibility of the wetted components with the solution you want to pump.
0.13 gph Fix Flow Rate Stenner® Pump Features:
- 3-point roller design assists in anti-siphon protection
- Used to inject chlorine and other chemicals at well pump
- Pump head requires no valves, allows for easy maintenance
- Self priming against maximum working pressure, foot valve not required
- Pump does not lose prime or vapor lock
- Pumps off-gassing solutions and can run dry
- Output volume is not affected by back pressure
- Injection check valve included with models rated upto 100 psi (6.9 bar) maximum
- Easy to change pump tube, lubrication is not required
- Pump tubes and pump heads interchange between models
- 3-point roller design assists in anti-siphon protection
- Used to inject chlorine and other chemicals at well pump
- Pump head requires no valves, allows for easy maintenance
- Self priming against maximum working pressure, foot valve not required
- Pump does not lose prime or vapor lock
- Pumps off-gassing solutions and can run dry
- Output volume is not affected by back pressure
- Injection check valve included with models rated upto 100 psi (6.9 bar) maximum
- Easy to change pump tube, lubrication is not required
- Pump tubes and pump heads interchange between models
SPECIFICATIONS
| Application | For inject chlorine and other chemicals at well pump, drinking water disinfection, swimming pool sanitation, well pumps, poultry, livestock houses, irrigation and systems with demand-based backup wells |
| Brand | STENNER PUMP® |
| Flow Rate | 0.13 gph |
| Height | 6 in |
| Includes | 1 Mounting Bracket, 1 Spare Tube Assembly, 1 Injection Check Valve, 1 20 ft LDPE Polyethylene White/Black NSF/FDA Approved Suction/Discharge Tubing, 1 Ceramic Clay Weight, 4 Connecting Nuts, 4 Ferrules and 1 Instruction Booklet |
| Length | 8 in |
| Manufacturer Name | STENNER PUMP® |
| Maximum Pressure | 100 psi |
| Series | Classic/45 Series |
| Standard/Approvals | UL ListedcCSAus CertifiedCE CertifedETL ListedFDA ApprovedNSF Certified |
| Type | Fixed Single Head |
| Voltage Rating | 120 VAC |
| Width | 5.3 in |
SPECIFICATIONS
| Application | For inject chlorine and other chemicals at well pump, drinking water disinfection, swimming pool sanitation, well pumps, poultry, livestock houses, irrigation and systems with demand-based backup wells |
| Brand | STENNER PUMP® |
| Flow Rate | 0.13 gph |
| Height | 6 in |
| Includes | 1 Mounting Bracket, 1 Spare Tube Assembly, 1 Injection Check Valve, 1 20 ft LDPE Polyethylene White/Black NSF/FDA Approved Suction/Discharge Tubing, 1 Ceramic Clay Weight, 4 Connecting Nuts, 4 Ferrules and 1 Instruction Booklet |
| Length | 8 in |
| Manufacturer Name | STENNER PUMP® |
| Maximum Pressure | 100 psi |
| Series | Classic/45 Series |
| Standard/Approvals | UL ListedcCSAus CertifiedCE CertifedETL ListedFDA ApprovedNSF Certified |
| Type | Fixed Single Head |
| Voltage Rating | 120 VAC |
| Width | 5.3 in |
