info@farmerboyag.com
1-800-845-3374
$2.89
Write a Review
Stainless Steel Thunderstud® 1/4 x 2-1/4 Inch
$0.93
In Stock
$0.93
DETAILS
The Ankr-TITE® wedge anchor is a high strength, fully threaded and torque controlled expansion anchor designed for anchoring into normal weight concrete, lightweight concrete and grouted concrete masonry.
The Ankr-TITE® anchor has a unique machine lathed expansion cone that supports a thick 3-dimple clip engineered to provide high load carrying capability and reduce slip in a variety of installation conditions.
Bolt size is hole size the drill bit diameter needed for proper installation is the same as the anchor diameter.
- Machine lathed expansion cone provides precise, rapid expansion
- Enlarged 3 dimple clip reduce slip, increase response in lightweight concrete
- Unique safety shoulder supports clip when anchor is under strain prevents clip from jumping onto threads during installation, minimizes bolt-end collapse and/or clip slippage under ultimate loading conditions
- Dog point head prevents point damage during installation
- Length identification code stamped on each anchor easy visual inspection
- 360 deg segment contact on clip equalizes load distribution increases load-carrying capacity, more adaptable to forgiving in different installation conditions
- Sets up fast
- Fewer rotations to achieve required torque
- Increase response in lighter concrete
- 360 deg segment contact on clip equalizes load distribution
- Increases load carrying capacity
- More adaptable to/"forgiving" in different installation conditions
- Wedge anchor design to hold materials in concrete
- Just drill a hole, hammer in the thunderstud, and tighten down with nut and washer
- Also commonly called thunderstuds
SPECIFICATIONS
| Application | Shelving, Racking, Railings, Structural Connection, Safety Related Attachments, Machinery, Sill and Support Ledgers, Lighting Standards and Base Plates and Industrial Equipment |
| Brand | Wej-It® |
| Country Of Origin | US |
| Diameter | 1/4 in |
| Drill Size | 1/4 in |
| Head Type | Dog Point |
| Manufacturer Name | Wej-It® |
| Material | 304 Stainless Steel |
| Overall Length | 2-1/4 in |
| Related Products | 20050093 |
| Standard/Approvals | QQZ-3252, Type ll, Class 3, GSA FFS-325 Group ll, Type 4, Class 1, GSA FFS-325 Group ll, Type 4 Class Federal Specification|Miami/Dade NOA |
| Thread Length | 1-1/4 in |
| Thread Size | 20 TPI |
| Thread Type | UNC |
| Trade Mark | Ankr-TITE® Thunderstud® |
| With | With Nut and Washer |
SPECIFICATIONS
| Application | Shelving, Racking, Railings, Structural Connection, Safety Related Attachments, Machinery, Sill and Support Ledgers, Lighting Standards and Base Plates and Industrial Equipment |
| Brand | Wej-It® |
| Country Of Origin | US |
| Diameter | 1/4 in |
| Drill Size | 1/4 in |
| Head Type | Dog Point |
| Manufacturer Name | Wej-It® |
| Material | 304 Stainless Steel |
| Overall Length | 2-1/4 in |
| Related Products | 20050093 |
| Standard/Approvals | QQZ-3252, Type ll, Class 3, GSA FFS-325 Group ll, Type 4, Class 1, GSA FFS-325 Group ll, Type 4 Class Federal Specification|Miami/Dade NOA |
| Thread Length | 1-1/4 in |
| Thread Size | 20 TPI |
| Thread Type | UNC |
| Trade Mark | Ankr-TITE® Thunderstud® |
| With | With Nut and Washer |
