info@farmerboyag.com
1-800-845-3374
$42.67
Write a Review
V-Krete® Xtra Plus 50 lbs, 1 QT Polymer V
$68.89
In Stock
$68.89
DETAILS
V-Krete® Xtra is pure cement technology providing a fast setting, extra abrasion-resistant, high strength and non-shrink mortar.
Use where toughest wear (slat edges and slats in front of feeders) exposure is the greatest. V-KRETE’S unique high-strength formula develops the density and hardness to withstand extreme pig traffic, salts, sulfates, and moderate acids that develop. Apply from ¼” to any thickness. V-KRETE can be extended with clean dry pea rock up to a 1:1 mix ratio to economically fill holes and severely worn zones. For use on slats, Feed Platforms, troughs, Re-set Posts and Worn Floor Surfaces.
- Sets hard within 30 minutes to one hour – Fast turnaround
- Plenty of working time – up to 30 minutes for small placements
- Abrasion resistant – Stands up to heavy livestock traffic
- Non-Shrink – Forms a tenacious bond
- Moisture resistant – Excellent in wet environments
- Resists Freeze Thaw – Remains bonded to the substrate
- Easy to Mix and Apply – Use with water or POLYMER V solution and apply
Use POLYMER V RESIN as an admix for added resistance to absorption by harmful chemicals and as primer for added bonding properties. POLYMER V is a high-end epoxy emulsion with superior performance properties. Typical requirements are one gallon of POLYMER to 3 to 4 bags of V-KRETE mortar.
It can be used for floor overlays, vertical and horizontal repair without forms, for grouting and building edges.
When mixed with KB25 Acrylic Resin, resistance to absorption by corrosive compounds and enhanced bounding properties are added to the repair.
Typical Coverage at ¼” thickness per 50 lb. bag
- 23 sq. ft. straight mortar
- .9 cu. Ft. extended with pea gravel or small rock
- Vertical and horizontal use
- Water, salt and sulfate tolerant, withstands tough conditions
- Exceptional abrasion resistance, stands upto heavy traffic
- Interior/exterior use, tolerates all weather conditions
- Non-shrink, minimizes risk of delamination, improves bond
- High strength, 3 to 5 times stronger than Portland products
- V-Krete® is a pure cement extra abrasion resistant, high strength and non-shrink mortar
- When mixed with KB25 acrylic resin, this pure cement repair or overlay delivers very good resistance to wear and attack by corrosive compounds
SPECIFICATIONS
| Application | Feed Bunks, Mangers, Parlors, Floors, Walls, Troughs, Gutters, Plant Floors, Parking Ramps, Roadways, Walkways, Driveways, Concrete Tanks and Pot Holes |
| Brand | VANTEK |
| Includes | 50 lb Bag Mortar, 1 qt. Polymer V Resin, KB25 Acrylic Resin and 1 Pouch of Slow Set |
| Related Products | 18010095 |
SPECIFICATIONS
| Application | Feed Bunks, Mangers, Parlors, Floors, Walls, Troughs, Gutters, Plant Floors, Parking Ramps, Roadways, Walkways, Driveways, Concrete Tanks and Pot Holes |
| Brand | VANTEK |
| Includes | 50 lb Bag Mortar, 1 qt. Polymer V Resin, KB25 Acrylic Resin and 1 Pouch of Slow Set |
| Related Products | 18010095 |
